A-DATA XPG Gaming Series DDR3-2000G DRAM Modules

A-DATA XPG Gaming Series DDR3-2000G DRAM Modules

A-DATA XPG Gaming Series DDR3-2000G DRAM Modules

A-DATA launches the XPG Gaming Series DDR3-2000G and XPG Gaming Series DDR3-2000G v2.0 DRAM modules. Both of them have been tested at latency settings 9-9-9-24 at 1.55V-1.75V and are available in 2GBx2 dual channel kit and 2GBx3 triple channel kit. The v2.0 comes with aluminum heat spreaders for effective thermal cooling.

Features and specifications of XPG Gaming Series DDR3-2000G DRAM Module

  • All DRAM IC are verified by high standard criteria.
  • High quality 8 layers PCB (Printed Circuit Board).
  • Equipped aluminum heat spreaders to perform heat away from DRAM module.
  • Backward compatible with DDR3-1600, DDR3-1333, and DDR3-1066.
  • Packaging: 2GBx2 dual channel kit and 2GBx3 triple channel kit
  • Optimized for 64-bit OS (operating system).
  • Test at latency settings 9-9-9-24 at 1.55V-1.75V.
  • SPD (Serial Presence Detect) programmed at JEDEC standard DDR3-1333 with latency settings at 9-9-9-24 for basic system booting.
  • Limited lifetime Warranty.

Features and specifications of XPG Gaming Series DDR3-2000G v2.0 DRAM Module

  • All DRAM IC are verified by high standard criteria.
  • High quality 2oz copper 8 layers PCB (Printed Circuit Board):
  • Assist spreading of heat from critical areas to perform effective thermal cooling.
  • Decrease the resistance of electronic flow to avoid electric waste.
  • Increase DRAM module’s lifetime.
  • Improve signal integrity.
  • Adopt aluminum heat spreaders with increased surface area to increase the efficiency of heat away.
  • Thermal Conductive Technology (TCT) – Each memory chip is direct contact with the heat spreaders to perform immediate heat spreading from critical areas.
  • Feature Extreme Memory Profiles.
  • Backward compatible with DDR3-1600, DDR3-1333, and DDR3-1066.
  • Packaging: 2GBx2 dual channel kit and 2GBx3 triple channel kit
  • Optimized for 64-bit OS (operating system).
  • Test at latency settings 9-9-9-24 at 1.55V-1.75V.
  • SPD (Serial Presence Detect) programmed at JEDEC standard DDR3-1333 with latency settings at 9-9-9-24 for basic system booting.
  • Limited lifetime Warranty.
[adata]

Advertisement